When you start looking at cut-throats, the listings are full of fractions and terms like "full hollow" and "French point" that mean very little until someone explains them. This guide has straight razor sizes explained in plain terms, along with the other features that change how a razor feels in the hand. By the end you should be able to read a razor description and know roughly how it will shave, and which combination makes sense for a first razor.

Straight razor sizes explained, blade by blade

A straight razor's size is the width of the blade, measured from the edge to the top of the spine. By long tradition it is given in eighths of an inch, so a 5/8 razor has a blade five eighths of an inch wide. The length of the blade varies much less from one razor to the next, so when people talk about size they nearly always mean width.

Width Roughly in mm How it feels
4/8 13mm Small and nimble, good for tight spots, holds little lather
5/8 16mm Light and easy to steer, a popular first size
6/8 19mm A good all-rounder with a bit more weight and rigidity
7/8 22mm Heavier, carries plenty of lather, feels very steady
8/8 25mm Large and weighty, more blade to manage around the nose and chin

You will occasionally see sizes outside this range, both smaller and much larger, though 5/8 to 7/8 covers the great majority of razors made today.

What width changes

A wider blade is stiffer and heavier, so it flexes less and tends to cut through thick stubble with a steadier feel. It also holds more lather on the face of the blade before you need to rinse it. The trade-off is that a wide blade is harder to manoeuvre in small areas, such as under the nose, around the chin and along the jaw, and you have to hold the spine further from the skin to get the same cutting angle.

A narrower blade is lighter and easier to steer into tight curves. It needs rinsing more often and can feel a little more flexible, which some men like because they can feel exactly what the edge is doing.

Points

The point, sometimes called the toe, is the end of the blade furthest from the handle. Its shape matters more than people expect, because it is the part most likely to touch your skin by accident.

Round point

The end of the blade is rounded off, so there is no sharp corner. This is the most forgiving shape and the one we suggest to anyone learning, because a slip with the toe is far less likely to nick you.

Square point

The spine and edge meet at a sharp corner. That corner is useful for precise work such as lining up a beard or getting under the nostrils, but it can catch the skin if you are not careful. Many experienced shavers like them, though they are less suited to a first razor.

French point

The spine curves down to meet the edge at a point. It looks elegant and gives some of the precision of a square point with a little less risk, although the tip is still sharp.

Spanish point

The end of the blade is cut with a concave curve, leaving a point at both the spine and the edge. You see it less often, and it has the same caution attached as a square point.

Grinds

The grind describes how the sides of the blade are shaped between the spine and the edge. It affects how stiff the blade is and how it feels and sounds as it cuts.

Full hollow

The sides are ground into a deep concave curve, leaving the blade very thin behind the edge. A full hollow razor is light, flexes slightly, and often makes a faint singing sound as it cuts stubble. Many men find that the feedback helps them judge the angle. It is the most common grind today, and The Strongroom is a full hollow 6/8.

Half hollow and quarter hollow

These grinds have a shallower curve, so more steel is left behind the edge. The blade is stiffer and a little heavier, and it shaves more quietly. Some men prefer this on tougher beards.

Wedge

A wedge, or near wedge, has flat or almost flat sides and is thick behind the edge. It is heavy and rigid and pushes through coarse stubble well. Wedges are harder to hone and less common, and they are not the easiest place to begin.

Scales

The scales are the two pieces that form the handle and fold around the blade when it is closed. They do not affect the shave much, but they do affect care.

Resin and acrylic scales are tough, do not mind water, and are the easiest to look after. Wood looks warm and natural but needs drying, as it can swell or crack if it is left wet for long. Horn is traditional and attractive, though real horn can warp with heat and moisture. Bone and metal turn up too. Whatever the material, the razor should be left open to dry fully before it is closed, which our guide on how to look after a straight razor explains.

What suits a beginner

For a first cut-throat, a 5/8 or 6/8 blade with a round point and a hollow grind is the sensible choice. A 5/8 is light and easy to steer, which helps while you learn the angles. A 6/8 has a little more weight, which some men find steadier. Either size will handle a full face shave and lining up around a beard.

The Keeper is a 5/8 round point in stainless steel, and The Warden is the same size and shape in carbon steel. If you are unsure which steel to choose, our guide to carbon steel vs stainless steel sets out the differences. Every cut-throat we sell is honed and stropped in the UK before it is posted, so it arrives ready to use. Cut-throat razors are sold to over-18s only, with an ID check on delivery in the UK, as set out on our delivery page.

If you would like the feel of a straight razor without honing or stropping, a shavette is worth a look. It takes a replaceable half blade, so the edge is always fresh, and our Tumbler shavette has a walnut handle. Our shavette vs straight razor guide compares the two properly.

Your next step

If you want to start with a size we know works well for beginners, The Keeper is a 5/8 round point and the razor we suggest most often. You can also build your own kit around it with a strop, brush and soap, and then follow our guide on how to shave with a straight razor for your first shave.

The Vault letter

10% off your first order

Join the list for your code and new guides as they go up.