Knowing how to strop a straight razor is what keeps the edge working between honings. A few minutes on a strop before each shave pulls the very fine edge back into line after the last shave bent it, and it is the main reason a well kept razor can shave smoothly for months. This guide covers setting up a hanging strop, using the canvas and leather sides, the stroke itself, and the mistakes that most often damage either the razor or the strop.
Why a straight razor needs stropping
The edge of a honed razor is extremely thin. Every shave bends it slightly out of line, and water and hair leave it a little rough. Stropping on leather straightens that edge and gives it a very light polish. It removes almost no metal, which is why it cannot fix a razor that has gone properly dull. That is a job for a hone.
Think of stropping as daily maintenance and honing as the occasional repair. For someone who shaves most days, honing is usually needed every few months, although it varies a lot with how coarse your beard is and how carefully you strop.
Setting up a hanging strop
A hanging strop has a clip or ring at one end and a handle at the other. Hang the clip from something solid at roughly waist height, such as a hook screwed into a wall or door frame. A towel rail can work if it does not move when you pull on it.
Hold the handle in your free hand and pull the strop straight and tight. It needs to stay taut the whole time you are using it. A sagging strop lets the leather wrap around the edge as the razor passes, and over time that rounds the edge off so it feels dull.
Our hanging strop has a canvas side and a cowhide leather side. If you have nowhere to hang one, or want something for travel, a paddle strop is leather fixed to a flat wooden paddle. It cannot sag, which makes it a little easier for beginners, but it is shorter, so you need a few more laps to do the same work.
A new strop can feel slightly draggy. Rubbing the leather briskly with the palm of your hand for a minute before use helps, and it smooths out on its own with regular use. There is no need to soak it in oil or conditioner.
How to strop a straight razor
Canvas side first
Start on the canvas. It cleans the edge and does a small amount of alignment before the leather. Ten to twenty laps is plenty. Some men use the canvas before every shave and others only every few days when the edge feels like it needs freshening. Either approach works, so see what suits your razor.
Then the leather
Turn the strop over and do 20 to 40 laps on the leather. This is where most of the work happens. A lap means one stroke away and one stroke back, so there and back counts as one.
Spine leading, edge trailing
Lay the razor flat on the strop at the end nearest the clip, with both the spine and the edge touching the leather. The spine should face you and the edge should point away from you, towards the clip.
Draw the razor towards you along the strop, spine first, so the edge trails behind. This is the opposite direction to shaving, and it is the rule that matters most. If the edge leads, it will slice into the leather.
Flip on the spine
At the end of the stroke, keep the spine pressed on the leather and roll the razor over between your fingers so the edge now faces you. Then push it back towards the clip, spine first again.
The spine should never leave the strop during the flip. Rolling the razor over on its spine is what keeps the edge from touching the leather while it is pointing the wrong way. Doing this slowly and deliberately for the first few weeks is the best way to make it automatic.
Light pressure
Use the weight of the razor and very little else. Pressing down makes the leather give under the edge, which has the same rounding effect as a slack strop. The razor should glide with a light, even contact along its whole length, and you should hear a soft, regular sound rather than a scrape.
Speed comes with practice. Experienced barbers strop quickly, but there is no benefit to going fast before your hands know the movement, so keep it slow until the flip feels natural.
Covering the whole edge
Most 5/8 and 6/8 razors are longer than the strop is wide. To cover the full length of the edge, move the razor slightly diagonally as you go, so the heel (nearest your hand) touches at the start of the stroke and the toe touches by the end. This is often called an X-stroke. A small angle is enough, and you can check by watching that the whole edge passes over the leather.
Common stropping mistakes
Rolling the edge
Flipping the razor over its edge instead of its spine, or letting the spine lift off the leather mid-stroke, can roll the edge over. A rolled edge feels dull and pulls even though the razor looks fine. Often another careful stropping session will bring it back. If it does not, the razor will need honing.
Nicking or cutting the strop
This happens when the edge leads, or when the razor is turned over on its edge at the end of a stroke. A small nick in the leather is mostly cosmetic and you can strop around it. A deep cut can catch the edge on every lap, and at that point it is usually simpler to replace the strop than to keep working around the damage. Most people nick a strop sooner or later while learning, which is one reason many start on a lower priced strop.
Too much pressure or a slack strop
Both round the edge over time. If your razor seems to get duller the more you strop it, these are the two things to check first.
Stropping a wet or dirty razor
Make sure the blade is clean and dry before it touches the leather. Water and soap residue get worked into the strop and can make the leather tacky.
Expecting stropping to replace honing
Stropping maintains an edge and cannot restore one. If the razor still tugs after 40 or 50 laps on good leather, it needs a hone or a honing service. Carbon steel razors such as The Warden are often said to take an edge a little more easily than stainless, and the carbon vs stainless guide covers that in more detail.
Fitting stropping into your shave
Strop before the shave, while your face is soaking under a hot flannel, so the edge is fresh when you start. After the shave, rinse and dry the razor fully before putting it away. You can find the rest of the routine in our guides on how to shave with a straight razor and how to look after a straight razor.
Cut-throat razors are sold to over-18s only in the UK, with an ID check on delivery (see our delivery page).
Your next step
If you do not have a strop yet, the cowhide and canvas hanging strop gives you both sides in one. If you are putting a whole set together, you can build your own kit with a razor, strop and brush in one go.
The Vault letter
10% off your first order
Join the list for your code and new guides as they go up.
10% off your first order. One letter a week at most. Unsubscribe any time.
Razors · Strops · Brushes · Soap
Beginner's kit
Using a safety razor properly
Razor care